Instruction Manual

20 745-814-B0-001, Rev. A
3.0 NetworkConguration,continued
3.4 The DSM Setup File, continued
3.4.3 Setting Transponder Community Strings with the DSM Setup File
The default transponder read-only community string is AlphaGet. The default read-write
community string is AlphaSet. These community strings are overridden by modem
community strings set in the DOCSIS Conguration File. If the modem is left unsecured
or if operating in Dual IP Mode, the XP-DSM needs to have its community strings
set in the Alpha MIB. This can be done with the DSM Setup File by including the
following parameters:
Parameter Type Description Value
AtiMgmtSnmpCommGet
OID: 1.3.6.1.4.1.926.1.3.1.4.1
Alphanumeric
String
Read Community
String
[desired value]
AtiMgmtSnmpCommSet
OID: 1.3.6.1.4.1.926.1.3.1.4.2
Alphanumeric
String
Read/Write
Community String
[desired value]
Table 3-4, Transponder Community String Parameters