Instruction Manual

15745-814-B0-001, Rev. A
3.0 NetworkConguration,continued
3.2 TheDOCSISCongurationFile
A cable modem’s DOCSIS Conguration File is a type-length-value (TLV) le that contains
important operational parameters as dened by the DOCSIS standards. It provides certain
settings for the cable modem. In addition to standard entries, settings in the DOCSIS
Conguration File should include the modem’s community strings and rmware upgrade
parameters. Place the conguration le in the TFTP root directory.
Due to different rmware and manufacturers’ Code Verication Certicate (CVC) les,
separate DOCSIS Conguration Files are required for the two cable modem versions
used with the XP-DSM in order to upgrade modem rmware: If your network includes
both versions, you will need to create two Conguration Files. The cable modem version
is indicated by the Organizationally Unique Identier (OUI) of the cable modem’s RF MAC
Address (see Section 5.1):
00:03:08 AM
00:05:CA Hitron
To build a DOCSIS Conguration File use a DOCSIS TLV editor program.
See the example Conguration File on the next page.
The modem community strings should be set in the DOCSIS Conguration File. Failure to set community
strings will result in a less secure system (default community strings will be required).
For automatically updating modem rmware with the DOCSIS Conguration File, see Section 5.1.
3.2.1 SettingModemCommunityStringsintheDOCSISCongurationFile
Set the modem community strings with the DOCSIS Conguration File by including in it
the following SNMP parameters:
NOTE:
MIB Parameter Object ID Description Value
docsDevNmAccessStatus.2 1.3.6.1.2.1.69.1.2.1.7 4
docsDevNmAccessIp.2 1.3.6.1.2.1.69.1.2.1.2 The IP address (or subnet) of the
network management station
e.g. 10.20.30.0
docsDevNmAccessIpMask.2 1.3.6.1.2.1.69.1.2.1.3 The IP subnet mask of the
network management stations
e.g. 255.255.255.0
docsDevNmAccessCommunity.2 1.3.6.1.2.1.69.1.2.1.4 The community string matched to
this IP/Mask entry
alphanumeric string
docsDevNmAccessControl.2 1.3.6.1.2.1.69.1.2.1.5 The level of access granted 1= none
2= read only
3= read/write
Table 3-1, Modem Community String Parameters
In Single IP Mode the community strings set in the DOCSIS Conguration File override any community strings
set in the Alpha MIB for the transponder (Section 3.3).
In Dual IP Mode or if the modem is left unsecured, the XP-DSM transponder reverts to default community
strings. Change these strings through the Alpha MIB (Section 6.2), either manually using a MIB browser or
automatically using a DSM Setup File (Section 3.4).
NOTE: