Manual

3. Maintenance
58
031-132-B0-001 Rev. A
TM
©2000
3.16 Removal and Replacement of Generator Set
Allow 45 minutes for completion of procedure
Tools required: #2 Phillips screwdriver
Crescent wrench
1/4 drive
3/8 drive
7/16 socket
Removal and replacement procedure:
1. Switch ECM to STOP
2. Disconnect all APU connectors and
remove APU housing door.
3. Verify Gas OFF and use
Crescent wrench to remove
upper end of flexible fuel hose.
4. Remove APU slide locking bolt.