Manual

3. Maintenance

031-132-B0-001 Rev. A

3.12 Muffler Replacement Procedure

Allow 15 minutes for completion of procedure.

Tools required: #2 Phillips screwdriver or hand drill

1/2 deep-well socket wrench

6 extension

3/8 drive

Removal and replacement procedure:

NOTE:

Allow the unit to cool thoroughly before beginning procedure.

2. Use the 1/2 deep-well socket to

remove the upper flange U-bolt

assembly.

3. Use the 5/16 wrench to remove the

Cable-5 Flexi-mounts. Once the

mounting hardware for the Flexi-

mounts have been removed, the

muffler is ready for removal.

1. Remove fastening hardware on muffler

access panel.