User manual

Page 15 of 19
The AlphaShield Home Edition requires a positive polarity to be provided to the center
conductor of the power plug. Ensure that the proper adapter plug used is connected to
provide proper power to the AlphaShield Home Edition device.
You can also obtain a replacement universal power adapter directly from AlphaShield
Inc. AlphaShield Inc. will charge an amount of $8.99 U.S. funds for a replacement
power adapter plus any additional shipping and handling charges incurred.
Do not use any other type of power adapter, other than the one specified here within the
manual, to provide power to the AlphaShield Home Edition device. Failure to do so may
cause permanent damage to the AlphaShield Home Edition device and will void the
warranty.
Product Specifications:
Category AlphaShield Home Edition
Warranty 1 year Limited Warranty
Interface Speeds Link speeds up to 10 Mbps
Power Supply DC wall adaptor 9 VDC 1.8 watts
ESD Line Protection Each port up to 1500 VDC
Electrical Interfaces 3 x IEEE 802.3 10Base-T RJ-45 Connectors
Network Interface 1 x 10Base-T Ethernet client port protected
Network Interface 1 x 10Base-T Ethernet port Modem connection
Network Interface 1 x 10Base-T Auxiliary port unprotected
Software Setup None, a true plug n’ play device
Operating System Runs on all operating systems (platform independent)
Terminal Interface Push button control (2 buttons)
Session Reconnect Manual Intervention (Push Button Reset)
Power Failure Retention Retained Settings Non-volatile
Device IP Address No IP Address assignment for device
IP Address Translation None (Device provides no address translation)
Maximum No. of Users Up to 30 Computers
Security Connection Time domain AlphaGAP Technology
Packet Inspection RPA (Real-time Packet Authorization) Firewall
Supported Protocols TCP/IP, FTP, UDP, HTTP, TFTP, IMAP, DNS,DHCP
Modes of Operation 3 modes of operation - Manual, Auto, Lock
User Session Times User Selectable (2 values: 15 and Infinite)
Intrusion Alert Visual LED Indicator illuminating red or amber
Instant Disconnect Manual Intervention (Push Button)
Physical Connection LED Link Status on 10Base-T ports
Power to Device Power Indicator via Connect (Center) LED
Data Transmission Inbound/Outbound LED Indicators
Operational Mode Selectable via Multi-position switch
Connection Indicator LED Indicator: two colors and two states
Operating Temperature 50 to 110 degrees F