HARDWARE FIREWALL User Guide Modem AlphaShield Internet Computer User with one computer. Computer Printer Internet Modem Hub/Router/ Proxy Server Computer AlphaShield Computer AlphaShield Protecting Small Network. Server Laptop Wireless Router Modem Computer with Wireless connection AlphaShield User with more than one computer at home/ small office using Wireless Router.
Quick Installation Guide Quick Steps to Install AlphaShield 1 Connect power to the AlphaShield. Middle LED will turn Red. 2 Connect “Cable/DSL” port of AlphaShield to your MODEM using the cable provided with MODEM. Right LED will turn Green, with the switch at the back of AlphaShield in AUTO/15 Mode (LED will be RED if switch is in LOCK Mode) 3 Connect “PC” port of AlphaShield to your computer or WAN port of Router using the cable provided with AlphaShield.
physical disconnection by re-connecting and making them active again. Dear Customer, Thank you for your purchase of AlphaShield and congratulations on choosing our “state of the art” technology to secure your High-Speed Internet connection. AlphaShield's unique feature of “disconnection” sets a new standard of 100% guaranteed security or your money back*, a claim that is unmatched by any of our competitors.
Product Specifications: Category AlphaShield Warranty Interface Speeds Power Supply ESD Line Protection Electrical Interfaces Network Interface Network Interface Network Interface Software Setup Operating System Terminal Interface Session Reconnect Power Failure Retention Device IP Address IP Address Translation Maximum No.
disconnect 15 minute inactivity timer value is about to expire. This means that no user sessions have taken place for the timer value and the current connection is 30 seconds away from a logical or physical disconnect. Only user activity, such as clicking onto a web link or by pressing the Connect button at the top of the AlphaShield, will reset the inactivity timer and maintain the user session. The duration of the connection is infinite regardless of user activity.
Trouble Shooting: Introduction: My AlphaShield does not power up. Why? Ensure that you are using the provided wall mount power adaptor (9 volt DC. 200 mA center positive) shipped with the AlphaShield and not some other power adaptor. Make sure that there is 110 volts AC or 220 volts AC being provided through the wall outlet (In North America 110 VAC). If all of the above is correct, then the provided adaptor could be faulty.
