Product specifications

Revision 1.4
(7) Immediate Disconnection of Communications
An immediate disconnection can be done at any time regardless of
the mode selected on the AlphaShield™. This is done by depressing
the disconnect button on top of the AlphaShield™ device.
Once logically or physically disconnected, the Connect LED will
illuminate red to indicate that no communication can be established
between the ports on the AlphaShield™ device.
To re-establish communications, the user must depress the connect
button on top of the AlphaShield™ device.
(8) Manual Mode Disconnection Warning
Once connected by depressing the connect button in the manual
mode the connect LED will remain a solid green if there is
communication activity between the AlphaShield™ ports. If
inactivity occurs for a period of 30 seconds less than the selected
manual 15 minute timer value, the connect LED will start flashing
green to indicate an impending logical disconnection within
30 seconds.
The client session can be extended by the user when the Connect
LED is flashing by depressing the connect button within the 30 sec-
ond warning window.
Once the connect button is depressed the timer value is reset to
the pre-selected value of 15 minutes and the Connect LED will
return to a solid green indicating an ongoing user session.
(9) Operation in Auto Mode
When the Auto mode is selected, a connection session must
be started with the depression of the connect button. The Connect
LED will illuminate a solid green to indicate AlphaShield™ is
in the connected state.
Installation and Operation
Getting
Started
8 Powered By AlphaShield
version 1.5.qxd 06/05/2003 15:55 Page 8