Product specifications

Revision 1.4
Follow the simple steps below to install your new AlphaShield™ to
your home computer. If any of the steps do not indicate the proper list-
ed expectations, please refer to the troubleshooting guide contained in
this manual.
(1) Remove the AlphaShield™ from the shipment box and
insure the following is accounted for.
One AlphaShield™ security device.
One 9 Volt DC, 300 mA Universal Power Adapter.
One RJ-45 6 foot straight through network cable.
One Installation and User’s guide.
(2) Power up the AlphaShield™ with the universal A.C. adapter.
Plug the circular plug from the power adapter into the power jack
on the AlphaShield™.
Plug the Universal 9 volt DC adapter into a standard wall socket.
Observe and make sure that the center connect LED on the front of
the AlphaShield™ illuminates red.
(3) Connect the AlphaShield™ to the external Cable or xDSL modem
Use a straight RJ-45 cable to connect your cable or xDSL modem to
the input RJ-45 of the AlphaShield™.
If connected properly with a good cable, the Inbound Data LED
indicator should illuminate green.
Installation and Operation
Getting
Started
6 Powered By AlphaShield
version 1.5.qxd 06/05/2003 15:55 Page 6