Product specifications

Revision 1.4
Q Can I have the AlphaGap™ , RPA and IP Stealth enabled to
my computer and have other devices still operational?
A Yes! There is an Aux. port available on the AlphaShield™ that is
enabled continuously, but does not provide any security. This port
can be utilized for VoIP phones, external switches, hubs, or any
other 10Base-T IP devices not requiring any security.
Q Can I use the Aux port as a test port?
A Yes! If you suspect any problem with your current AlphaShield™
or you cannot establish a connection, you can connect the computer
to the Aux port temporarily to confirm that there is no problem
with the AlphaShield™. If your ISP or cable provider suggests
bypassing all devices while setting up your connection, you may
connect the computer to the Aux port for the duration of the test.
NOTE: Remember To Put The Connection Back To it’s Proper
PC Port Upon Completion Of The Test Or Setup Procedure.
Q Can I connect more than one computer to my AlphaShield™
Device?
A Yes! If you are connecting more than one computer to your
AlphaShield™ device you must connect the hub or switch to the
protected PC port on the AlphaShield™. It is also recommended
that AlphaShield™ be switched to the auto mode. You must also
have an IP address assignment from your local cable or telephone
company for each and every computer you are connecting to the
AlphaShield™.
Frequently Asked Questions
Additional
Information
24 Powered By AlphaShield
version 1.5.qxd 06/05/2003 15:55 Page 24