Product specifications

Revision 1.4

The AlphaShield™ does not function when I connect to my Hub or

Switch. Why?

Your AlphaShield™ device is a 10Base-T device and must be

connected to a hub or switch that can auto-sense or switch to

10Base-T. If the hub or switch is fixed at 100Base-T, your

AlphaShield™ will not function.

User sessions have to be re-established after a logical or physical

disconnect. Why?

Your AlphaShield™ device contains a memory map of concurrent

valid users sessions while you are connected to the Internet. Once a

logical or physical disconnection has taken place, either manually or

automatically, the IP map table is discarded. All users sessions must

be re-established after a logical or physical disconnection by re-co-

nnecting and making them active again.

Only one computer will work with my AlphaShield™ Device. Why?

Your AlphaShield™ has a provision for a one to one correlation

of IP addresses to computer connections. You must have one assigned

address for every computer that is connected to the protected PC Port

side of the AlphaShield™. Your AlphaShield™ does not employ any

type of Network Address Translation.

Troubleshooting

Additional

Information

version 1.5.qxd 06/05/2003 15:55 Page 22