User's Manual
Alpha Networks Proprietary and Confidential Information
6
2.3.1.2 Operating Voltage
y
3.3VDC +/- 10%
2.31.3 Current
Consumption
y
450 mA at continuous transmit mode (2 Tx chains on )
y
250 mA at continuous receive mode (2 Rx chains on )
2.3.1.4 Form Factor and
Interface
y
USB form factor
2.3.1.5 LED
y
External LED function supported
2.4 Software Requirements
The Configuration Software supports Linux2.6. This configuration software includes the following functions:
y Information
Information allows you to monitor network status.
y Configuration
Configuration allows you to configure parameters for wireless networking.
y Security
Supports enhanced security WEP, 802.1x, WPA and WPA2.
2.4.1 Information
# Feature Detailed Description
2.4.1.1 General
Information
y
General Information shows the name of Wireless
Adapter, Adapter MAC Address, Regulatory Domain,
Firmware Version, and Utility Version.
2.4.1.2 Current Link
Information
y
Current Link Information shows the Current Setting
ESSID, Channel Number, Associated BSSID, Network
Type, Security Status, Link Status, Transmit Speed,
Signal Strength, and Link Quality.
2.4.1.3 Site survey
y
To search the neighboring access points and display the
information of all access points.
2.4.2 Configuration
# Feature Detailed Description
2.4.2.1 ESS ID
y
Input an SSID number if the roaming feature is enabled
y
Supports for ASCII printable characters.
2.4.2.2 Network Type
y
Ad-hoc Mode and 802.11 Ad-hoc Mode for network
configurations that do not have any access points
y
Infrastructure Mode for network configurations with
access points
2.4.2.3 Power Save
y
Extend the battery life of clients by allowing the client
to sleep for short periods of time while the Access Point
buffers the messages.
2.4.2.4 RTS Threshold
y
Set the number of bytes used for fragmentation
boundary for messages
2.4.2.5 Fragment
Threshold
y
Set the number of bytes used for RTS/CTS boundary
2.4.2.6 Transmission Speed
y
This indicates the communication rates. Select
appropriate transmission speed to match your wireless
LAN settings
2.4.2.7 Roaming
y
Support Automatic or Manual Rescan to associate with
access point.
2.4.3 Security
# Feature Detailed Description
2.4.3.1 Encryption y RC4 encryption algorithm
y Support 64-bit and 128-bit WEP encryption