User Manual

Alpha Networks Proprietary and Confidential Information
3
2. Continuous Transmit Options.
a. Before the Continuous Transmit test, need to press “e” first
The command will load the calibrate data to the EEROM, then the card can transmit the target
power
b. The channel frequency, data rate and output power could be changed in continuous transmit
options. Press “c” to increase the output power , 11g Power (data rate 6Mbps) is 17dBm, 11b
Power is 17dBm , Press ESC to return to the main Test Options menu when finished.
3. Continuous Receive Options
Continuous receive options will put the radio into receive mode to allow for radio measurements. Press
ESC to return to the main Test Options menu when finished.