User Manual

Alpha Networks Proprietary and Confidential Information
6
# Feature Detailed Description
Protocol
2.2.4.7 Transmitter
Output Power
Ÿ
Maximum to 27.4dBm
2.2.4.8 Receiver
Sensitivity
Ÿ
Typical Sensitivity at Which Frame (1000-byte PDUs)
Error Rate = 10% at room Temp. 25degree C and 3.3V
HT20
Ÿ
87dBm at MCS0
Ÿ
85dBm at MCS1
Ÿ
82dBm at MCS2
Ÿ
78dBm at MCS3
Ÿ
76dBm at MCS4
Ÿ
72dBm at MCS5
Ÿ
70dBm at MCS6
Ÿ
69dBm at MCS7
HT40
Ÿ
84dBm at MCS0
Ÿ
81dBm at MCS1
Ÿ
79dBm at MCS2
Ÿ
75dBm at MCS3
Ÿ
73dBm at MCS4
Ÿ
68dBm at MCS5
Ÿ
66dBm at MCS6
Ÿ
65dBm at MCS7
2.3 General Section
# Feature Detailed Description
2.3.1.1 Antenna
Connector
Ÿ
Three UFL antenna connectors
2.3.1.2 Operating
Voltage
Ÿ
3.3VDC +/- 5%
2.31.3 Current
Consumption
Ÿ
1000mA at continuous transmit mode (2 Tx chains on )
Ÿ
650mA at continuous receive mode (3 Rx chains on )
2.3.1.4 Form Factor and
Interface
Ÿ
Mini-PCI form factor
2.3.1.5 LEDs
Ÿ
External LED function supported
2.4 Software Requirements
The Configuration Software supports Linux2.4.6. This configuration software includes the following functions:
Ÿ Information
Information allows you to monitor network status.
Ÿ Configuration
Configuration allows you to configure parameters for wireless networking.
Ÿ Security
Supports enhanced security WEP, 802.1x, WPA and WPA2.
2.4.1 Information
# Feature Detailed Description
2.4.1.1
General
Information
Ÿ
General Information shows the name of
Wireless Adapter, Adapter MAC Address,
Regulatory Domain, Firmware Version, and