User's Manual

Alpha Networks Proprietary and Confidential Information
8
# Feature Detailed Description
19
78 162 86.7 180
20
117 243 130 270
21
156 324 173.3 360
22
175.5 364.5 195 405
23
195 405 216.7 450
2.2.3.6 Media Access
Protocol
CSMA/CA with ACK
Typical RF Output Power (tolerance +-2dB) at each RF chain, Data
Rate and at room Temp. 25degree C
Note: The maximum power setting will vary according to individual country regulations.
2.2.3.7 Transmitter Output
Power at Antenna
Connector
2.4GHz Band/HT-20
+ 17dBm at MCS 0/1
+ 17dBm at MCS 2/3
+ 16dBm at MCS 4/5
+ 14dBm at MCS 6/7
2.4GHz Band/HT-40
+ 15dBm at MCS 0/1
+ 15dBm at MCS 2/3
+ 14dBm at MCS 4/5
+ 12dBm at MCS 6/7
Maximum Sensitivity at each RF chain at Which Frame (1000-byte
PDUs) Error Rate = 10% and at room Temp. 25degree C
2.2.3.8 Receiver Sensitivity
at Antenna
Connector
2.4GHz Band/HT-20
–82 dBm at MCS0
–79 dBm at MCS1
–77 dBm at MCS2
–74 dBm at MCS3
–70 dBm at MCS4
–66 dBm at MCS5
–65 dBm at MCS6
–64 dBm at MCS7
2.4GHz Band/HT-40
–79 dBm at MCS0
–76 dBm at MCS1
–74 dBm at MCS2
–71 dBm at MCS3
–67 dBm at MCS4
–63 dBm at MCS5
–62 dBm at MCS6
–61 dBm at MCS7
2.3 General Section
# Feature Detailed Description
2.2.4.1 Antenna Connector
Three UFL compatible antenna connectors
2.2.4.2 Operating Voltage
3.3VDC +/- 10%
2.2.4.3 Current
Consumption
1.2 A
2.2.4.4 Form Factor and
Interface
PCI-E connector with RGMII signal
2.2.4.5 PCB Outline See below
2.2.4.6 Pin Assignment
See below