User's Manual

31
4.6 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the encryption for
your wireless network clients. In order to use it with your router, firstly, you must
configure the wireless encryption on the router. You can find instructions for configuring
it in the User Manual located on the CD that came with your router. Secondly, you will
need to have a router that supports this feature, like our AR680W Airlink101 300N
wireless router or AR670W Airlink101 150N wireless router. If your wireless adapters do
not support WPS, you will need to set up the wireless security manually and you can
skip this section.
In the instructions below, we are going to use the utility, Wireless Monitor that comes
with the Airlink101 150N Wireless Adapters with the AR680W Airlink101 300N Wireless
router as the example.
Step 1 Go to the computer with the 150N Wireless Adapter and open the Airlink101
Wireless Monitor. Click on the WPS Connect button.