Manualshelf

User's Manual

ManualsBrandsAlpha Networks ManualsElectronics11ac 4T4R enterprise AP
12345678910
NOTE
Make sure to insert the Wi-Fi card at a 45 degree angle, then press the card down. Use
screws to secure the card in place. Also, ensure that the board is properly cooled to avoid
the board from crashing.
Antenna Ports
Wifi Card 1
Wifi Card 2
Figure 3. Top view of T1023 board
3
Preparing T1023 board
Follow the steps given below to prepare the T1023 board.
1. Attach the RS-232 serial cable between the T1023 board UART0 port and serial port of the host computer.
Preparing T1023 board
T1023WLAN Wi-Fi Wave2 Access Point Router Getting Started Guide, Rev. 0, 09/2015
Freescale Semiconductor, Inc. 3