User's Manual

6
PT-3152(C)/PT-3153(C)
Quick Installation Guide
4. This screen allows you to change the
administrator password. To change
the password carry out the following:
 Tick the Change Password
checkbox
 Type a New Password
 Type it again to Confirm
Password.
 Click the > symbol to proceed to
the next IPCam Wizard menu
screen.
Leave the checkbox unchecked to skip this step.
5. This screen allows you to set a
Camera Name and configure the
date and time settings of the
Camera:
 Type a name to identify your
Camera in the Camera Name field.
 Use the drop-down menu to set
the Camera’s date.
 Adjust the time of the camera, by
using the adjacent up and down
controls
 Click the Clock icon to copy the time and date settings from your computer.
 Click the > symbol to continue.
6. Choose how to configure the
network settings. The options are
PPPoE, DHCP and Fixed IP
(manually set IP).
Click the > symbol to proceed to
the next IPCam Wizard menu
screen.
If you are choosing a PPPoE network connection, proceed to step 6a to configure
PPPoE network settings.