User's Manual

4
PT-3152(C)/PT-3153(C)
Quick Installation Guide
2
Hardware Installation
Attach the Metal Plate
1. Remove the two rubber
pads under the base of
the Camera.
2. Slide the metal plate onto
the base of the Camera,
making sure that the two
holes on the base of the
Camera align with the
two screw holes on the
base of the Camera.
3. Secure the metal plate to the base of the Camera with the two screws provided.
4. You can: install the camera to the ceiling using two ceiling screws (); or, install
the camera to the wall using two wall screws ().
Connect the Ethernet Cable
Connect an Ethernet cable to
the network cable connector
located on the camera’s rear
panel, and then connect it to the
network.
Connect the Power Adapter
Connect the external power
adapter to the DC power input
connector located on the
camera’s rear panel, and then
connect it to your wall outlet.
(Tip: You can confirm the power
source is supplied from the
Power LED on the camera.)