User's Manual

PERFORMING ADVANCED TASKS
61
MY NET N900 CENTRAL ROUTER
USER MANUAL
2. Click the Port Forwarding tab.
3. Enter the following for each port forwarding rule you create:
4. Click Save at the top or bottom of the page.
Setting Description
Enabled Selecting the check box enables the port forwarding rule.
IP Address IP address of the device on your local network. This field can
be populated by selecting a Computer Name from the drop
down list.
Application Name From the drop-down list, select the application whose
information will pass through the specified port? Click the
double arrow button to the left to populate the name field.
External Port Enter the port(s) you wish to forward from the WAN interface
(Internet). The port is automatically populated if you pick an
application from the drop-down list.
Internal Port Enter the port(s) you wish to forward to on the LAN client. The
port is automatically populated if you pick an application from
the drop-down list.
Protocol Select the protocol which you wish to port forward. The
options are All, TCP or UDP. The protocol is automatically
selected if you pick an application from the drop-down list.
Computer Name From the drop-down list, select the computer that will receive
the information? Click the double arrows to the left to populate
the IP address field.