User's Manual

Table Of Contents
PERFORMING ADVANCED TASKS
59
MY NET N900 CENTRAL ROUTER
USER MANUAL
3. Enable DHCP server (On by default) and click Save.
4. Configure DHCP IP Address Range. By default the range is IP address 192.168.1.100
to IP address 192.168.1.149.
5. (Optional) Set a Local Domain Name.
6. Set the DHCP Lease Time (hours) and click Save.
7. Connect all the client devices.
8. Click the Device and Client Table tab. The table lists all of the client devices (wired/
wireless) and displays the number of devices connected along with the IP address and
MAC address of each device.
To manually assign a device a DHCP IP address:
1. In the Manual Added Device section of the screen, enter the device’s IP address, MAC
address, and device name.
2. Click Add/Update. The device information populates the device table below.