User's Manual

Table Of Contents
PERFORMING ADVANCED TASKS
57
MY NET N900 CENTRAL ROUTER
USER MANUAL
4. When a confirmation message displays, click OK.
5. Wait until the router reboots before using it.
To reset the router manually:
Press the reset button on the bottom of the router for at least 10
seconds. When the reset
finishes, the Power LED blinks.
Rebooting the Router
You can reboot the router two ways. If you are physically close to it, just push the On/Off
button on the router. If you cannot easily push the button:
1. Click the Advanced icon and then the
Administrator icon.
2. Click the System tab.
3. Scroll to the bottom of the screen and click Reboot.
Using the Router as an Access Point
You can use your My Net router as an extender or access point (AP). Extender mode can:
Add wireless coverage to a home network without wireless coverage.
Expand a home network’s wireless coverage.
Note: To use the router in extender mode, the router must be connected by wire
to your computer.
Important: Do not reboot the router or close the application while the update is
taking place.