User's Manual

ADVANCED SETTINGS
41
MY NET N900 CENTRAL ROUTER
USER MANUAL
Application Level Gateway (ALG) Configuration Screen
PPTP (Point-to-Point
Tunneling Protocol)
Turn ON (default) PPTP ALG if you use a PPTP client to dial into
your corporate network via the Internet.
IPSec (VPN) Turn ON (default) IPSec ALG if you use a IPSec client to dial into
your corporate network via the Internet.
SIP (Session Initiation
Protocol)
A signaling protocol for Internet Telephony. Turn ON (default) SIP
ALG if you use VoIP telephone service over your Internet
connection.
Routing Screen
Route List
Active Select the check box to enable the routing entry.
Name Enter a name for the routing entry.
Interface Select the interface (WAN or LAN) for the routing entry.
Destination IP IP address/network to which the data is sent.
Netmask Enter a Netmask for the Destination IP to define the destination
network.
Gateway Enter the Gateway IP address through which this router can be
reached. The Gateway IP should be reachable from your router.
FasTrak QoS Screen
Enable QoS
Enable QoS Enable or disable the QoS application to prioritize different client
applications/traffic types over the Internet.
QoS Setup
Uplink Speed The uplink speed (in Kbps) at which data can be transferred
from the router to your ISP. The Auto (default) setting can
automatically detect the uplink speed, or you can select other
values from the drop-down list or enter your own. QoS
prioritizes all Internet traffic based on this setting.
FasTrack Rules Click the Restore Default button to display the default names
and priorities.
Classification Rules
Name Name given to the service/client for the classification entry.
Priority When creating a rule, select the priority in which the application
or device can send and receive data over the network.