User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Basic Settings and Tasks
- Advanced Settings
- Performing Advanced Tasks
- Installing and Using WD Print Share
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
ADVANCED SETTINGS
37
MY NET N900 CENTRAL ROUTER
USER MANUAL
MAC Filter – Control network access based on the MAC address of the client device. The
MAC address is a unique ID assigned by the manufacturer.
Parental Controls – Control Internet access to specific websites and access periods. See
“Setting Up Parental Controls” on page 49.
Firewall Screen
DMZ Screen
Create Firewall Rules
Name Name to identify the firewall rule.
Source Local network (LAN) or Internet (WAN).
Source IP Range Range of IP addresses where the traffic is initiated.
Protocol Protocol that will be applied in the firewall rule. Available
options are All, TCP, UDP and ICMP.
Port Range Network traffic port range that will be applied in the firewall
rule.
DMZ Host
Enable DMZ Toggle the button to On to enable DMZ.
DMZ IP Address If DMZ is enabled, select a computer from the list and click
the double arrows to populate the IP address, or manually
enter the computer’s IP address.
MAC Filter Screen
MAC Filtering Rules
MAC Filtering drop-down
list
The default setting is Turn MAC Filtering OFF. Other options
are:
•Turn MAC Filtering ON and DENY computers listed to
access the network.
• Turn MAC Filtering ON and ALLOW computers listed
to access the network.
Active Status of the MAC filtering entry.
MAC Address Unique identifier of you local network device being filtered.
Double arrows After selecting a computer from the DHCP Client List, click
the double arrows to populate the MAC Address box.
DHCP Client List Computers and devices that are currently connected to your
router.