User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Basic Settings and Tasks
- Advanced Settings
- Performing Advanced Tasks
- Installing and Using WD Print Share
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
BASIC SETTINGS AND TASKS
20
MY NET N900 CENTRAL ROUTER
USER MANUAL
Accessing Files Stored on an Attached USB Drive (Mac)
To access the files stored on a USB drive connected to the router, make sure that the drive
was properly set up as described in “Setting Up External Storage” on page 17. After the
setup is complete, access it through the network by doing
the following:
1. Click Go > Connec
t to Server.
2. Type smb://mynetn600 or
smb://mynetn750 depending on the router model, if the
router’s default name was not changed. The folder displayed is the external USB drive.
3. If you are prompted for a username and password, enter the username and password
that you created when you set up external storage. If a password was not created,
select or enter guest.
Setting up and Managing Internal Storage
Adding a Device
To connect a WPS-enabled wireless device, press the WPS button on the front of the router
or enter a PIN on the device’s Wi-Fi connection page. If the device is not capable of WPS,
you can still connect to the router using a network name and password.