User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Basic Settings and Tasks
- Advanced Settings
- Performing Advanced Tasks
- Installing and Using WD Print Share
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
ADVANCED SETTINGS
42
MY NET ROUTERS
USER MANUAL
Screen Descriptions
Port Forwarding – Open multiple ports or a range of ports in your router and redirect data
through those ports to a single computer on your network. Applies only to an Internet
session.
ALG – Enable or disable Application Level Gateway (ALG) configuration. This allows certain
clients, such as PPTP, IPSec or SIP, to have temporary firewall rules created automatically
when detected by the firewall.
Routing – Defines static routes to specific destinations.
FasTrack QoS – Configure QoS powered by WD FasTrack QoS technology. This engine
improves your media applications and online game experience by prioritizing your game
traffic over other network traffic, such as Web traffic. Use QoS rules to set the priority of your
applications.
Network UPnP – Enables or disables peer-to-peer Plug and Play functionality for network
devices.
Port Forwarding Screen
Port Forwarding Rules
Enabled Select to enable the port forwarding rule. Clear the check box
to disable.
Application Name From the drop-down list, select the application whose data you
want to forward to the client on your local network. Click the
double arrows to populate the Name, Internal Port, External
Port and Protocol fields.
External Port Range Enter the port(s) you want to forward from the WAN interface
(Internet). The port is automatically populated when you pick an
application from the drop-down list.
Protocol Select the protocol that you wish to port forward. The options
are All, TCP, and UDP. The protocol will be automatically be
selected if you pick an application from the drop-down list.
IP Address Can be manually entered or populated by your selection from
the Computer Name drop-down list.
Computer Name Device on your local network which the rule will be applied to.
Click the double arrows to populate the IP Address field.
Internal Port Range Enter the port(s) on the LAN client to which you want to forward
data. The port is automatically populated when you pick an
application from the drop-down list.