User's Manual

ADVANCED SETTINGS
34
MY NET ROUTERS
USER MANUAL
Wireless Setup Screen
Wi-Fi Protected Setup (WPS) Screen
Wireless 2.4Ghz and Wireless 5Ghz
Network Name (SSID) Name given to the wireless network.
Security Mode Type of security being applied to the wireless network.
Options include WEP (Wired Equivalent Privacy)-Personal,
WPA2-Personal, WPA-Personal, WPA/WPA2-Personal
(default), WPA-Enterprise, WPA2-Enterprise, and WPA/
WPA2-Enterprise.
If 802.11n is selected as the network mode, WEP is not
available, but it is available to 802.11b-only, 802.11 g-only,
802.11 a-only and a mix of these.
Network Key Password for accessing the wireless network.
Network Mode For the 2.4GHz band, the default network mode is Mixed
802.11 b+g+n. Keep this setting for maximum client
compatibility. The other network modes are 802.11b only,
802.11g only, 802.11n only, Mixed 802.11 b+g and Mixed
802.11 g+n.
For the 5GHz band, the default network mode is Mixed
802.11 a+n. Keep this setting for maximum client
compatibility. The other network modes are 802.11a only and
802.11n only.
Channel Width The default setting is 20/40 MHz (Auto) for the 5 GHz band,
which is recommended unless you are having connectivity
issues. The default for the 2.4 GHz band is 20 MHz.
Channel Accept the default (Auto) or select a channel from the drop-
down list.
SSID Broadcast Your wireless clients identify and connect to your router with
the network name or SSID (Service Set Identifier). The SSID
broadcast is ON by default. For additional security, you can
turn SSID broadcast to OFF.
WMM QoS WMM (Wi-Fi Multimedia) is a standard that defines quality of
service (QoS) in Wi-Fi networks, prioritizes capability, and
optimizes video and audio performance.
Add new wireless device into this network
Router/Access Point: PIN
Code
Personal identification number for WPS authentication.
Wi-Fi Protected Setup (WPS)
Enable WPS Enable the router to establish a secure connection to other
WPS-enabled Wi-Fi devices.