User's Manual
Table Of Contents
- WD® Service and Support
- Important User Information
- Product Overview
- Getting Started
- Basic Settings and Tasks
- Advanced Settings
- Performing Advanced Tasks
- Installing and Using WD Print Share
- Troubleshooting
- Regulatory and Warranty Information
- Appendix: Technical Specifications
- Index
BASIC SETTINGS AND TASKS
23
MY NET ROUTERS
USER MANUAL
To connect a WPS-enabled device:
1. Click the Click here to connect using WPS link to display the screen shown
below:
2. Select one of the two WPS methods:
a. Method 1: Press the WPS button on the front of the router or click the virtual button on this
screen. On your wireless device, press the physical
WPS button or click the virtual WPS
button.
b. Method 2: If prompted by your wireless device, enter the router’s WPS PIN shown on the
screen into your wireless device.
Note: You can change the PIN on the Wi-Fi Protected Setup screen. See
“Advanced Wireless Category” on page 33.
3. Click Next.
To connect a device that is not WPS enabled:
1. On the Add a Device screen, click the Click here to connect by entering network
name and password key.