User's Manual

BASIC SETTINGS AND TASKS
21
MY NET ROUTERS
USER MANUAL
Adding a Device
To connect a WPS-enabled wireless device, push the WPS button on the front of the router
or enter a PIN on the device’s Wi-Fi connection page. If the device is not capable of WPS,
you can still connect to the router using a network name and password.
To connect a WPS-enabled device:
1. Click the Click here to connect using WPS link to display the screen shown
below:
2. Select one of the two WPS methods:
a. To use Method 1, press the WPS button on the front of the router or click the virtual button
on this screen. On your wireless device, press the physical or click the virtual
WPS button.
b. To use Method 2, if prompted by your wireless device, enter the router’s WPS PIN shown on
the screen into your wireless device.
Note: You can change the PIN on the Advanced Wireless / Wi-Fi Protected
screen. See “Advanced Wireless Settings” on page 27.
3. Click Next.