User's Manual Part 2

WD TV Play Media Player
User Manual
SETUP AND ADVANCED FEATURES – 205
PRELIMINARY-P3
Device Reset
Use this menu to perform device reset options:
Reset All Settings Back to Factory Default – restores all media player system
preferences and playback settings to their default factory values. This may correct
problems caused by a failed firmware upgrade or faulty configuration settings.
Reset All Settings Except Online Service Accounts – restores all media player
system preferences and playback settings to their default factory values with the
exception of your internet Services personal account information.
Reset All Online Service Accounts – clears all account information and logins you
have entered for Services, with the exception of CinemaNow and TuneIn (you must
contact these service providers to have the media player removed from your
account).
Reset Web Interface Login – clears the user-created Web UI password and resets
it to the default password. See “Using the Web UI” on page 45 for details.
Important: If you specified a static IP address (or any other non-standard
configuration), the media player will no longer appear on the network after
the reset. Also, be sure to reset the media player to factory defaults and
reset all online service accounts before returning or otherwise transferring
the device to purge your internet services personal account information,
network shares passwords, and wireless network passwords.
To perform a device reset:
1. Press / to select Device Reset, then press OK.
2. Press
/ to select a device reset option, then press OK.
3. Select OK in the confirmation screen, then press OK.
Device Restart
Press OK to restart the media player.
Check Latest Firmware
This menu displays the current firmware version. Press OK to check for new
firmware.