User Manual

European Union Notice

Radio products with the CE marking comply with the R&TTE Directive (1999/5/EC), the

EMC Directive (2004 / 104 / EC) and the Low Voltage Directive (73/23/EEC) issued by

the Commission of the European Community.

Compliance with these directives implies conformity to the following European Norms:

z EN 60950-1 Product Safety

z EN 300 328 Technical requirement for radio equipment

z EN 301 489-1/-17 General EMC requirements for radio equipment

Industry Canada Statement

This device complies with RSS-210 of the Industry Canada Rules. Operation

is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may

cause undesired operation of the device. This device has been designed to

operate with an antenna having a maximum gain of 1.8dBi.

Antenna having a higher gain is strictly prohibited per regulations of Industry

Canada. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its

gain should be so chosen that the EIRP is not more than required for

successful communication.

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

1.94dBi.