User's Manual

Connecting the Router Wirelessly
Below are the default wireless settings of the router. You must configure your wireless network
card to the same settings in order to establish a wireless connection to the router. Please refer to
your wireless network card’s manual on how to configure these settings.
SSID: default Operating Mode: Infrastructure Authentication: Open System Channel #: 6 WEP:
disabled
If you want to change the router’s wireless settings, log in to the router and select the
Wireless tab. Be sure to click Apply and OK to save the setting.
For information on changing the router’s log in password and enabling wireless encryption, please
refer to the User’s Manual in the provided CD.
Troubleshooting
If you have trouble connecting to the Internet, try the following steps.