User's Manual

Wireless 54 Mbps PCI Card
22
Configuration Host Protocol (DCHP) server. You may also set the DNS server address
settings and WINS address settings.
If the network you are using is a computer-to-computer (or ad-hoc) network, no access
points are used. You may check the box This is a computer to computer (ad-hoc) network;
no access points are used to enable this option.
Using a Proxy Server
Some LAN networks will establish a proxy server to handle the downloading of web pages,
etc. and storing them temporarily so other users on the LAN can access them without
having to reload the web page from the Internet each time. This allows for some saving of
the available bandwidth in the connection between the Internet (WAN) and the LAN.
If your LAN has such a server, you will need to configure your WIRELESS LAN CARD to
be able to connect to it. You will need to obtain the necessary connection information from
your network administrator.
Click on the ProxySetting tab to open the following screen.
If your network administrator has installed and enabled the automatic proxy server
configuration, you can click the Automatically detect settings click-box. Alternatively, if you
know the address of the PC where the automatic configuration script is stored, you can
click the Use automatic configuration script click-box and enter the address in the Address
field.
Otherwise, you can click the Use a proxy server for LAN click-box. This will allow you to
enter the IP addresses and port numbers for the various proxy servers that may exist on
your LAN. You will need to ask your network administrator to determine the proxy server
settings for your network.