User's Manual

First, connect the power adapter to the receptor at the back panel of the

DWL-2200AP and then plug the other end of the power adapter to a wall outlet

power strip. The Power LED will turn ON to indicate proper operation.

B. Insert one end of the cable to the Ethernet port on the back panel of the

DWL-2200AP and the other end of the cable to an Ethernet Broadband

Router (i.e., D-Link DI-604) or Switch (i.e., D-Link DSS-5+). Note: You also

have the option of connecting the DWL-2200AP directly to the computer that will

be used for configuration. The Link LED light will illuminate to indicate a proper

Ethernet connection. (Note: The Ethernet Port on the DWL-2200AP is Auto-

MDI/MDIX. Meaning you can use a straight-through or crossover-Ethernet cable

to connect to the Ethernet port on the DWL-2200AP.)

C. The DWL-G650 AirPlus Xtreme G Wireless Cardbus Adapter and the DWL-

G520

AirPlus Xtreme G Wireless PCI Adapter will connect, out of the box , with

the

DWL-2200AP, using their default wireless settings. Computers with 802.11b

wireless adapters can also connect to the DWL-2200AP.

Connecting the DWL-2200AP Wireless

Access Point to Your Network

A. Receptor for

Power Adapter.

C. Antennas Used to

wirelessly connect to

802.11b/g adapters.

Reset Button

Pressing this button restores

the Access Point to its original

factory default settings.

B. LAN PORT for

connecting the access

point to a switch on the

local network with an

ethernet cable