User's Manual

IEEE 802.11g Cardbus Wireless Network Adapter

• Check that the IP Address assigned to the wireless card is within the

same IP Address range as the access point and gateway. (For

example: if one computer has an IP Address of 192.168.0.2, the

other computers should have IP Addresses that are sequential, like

192.168.0.3 and 192.168.0.4. The subnet mask must be the same for

all the computers on the network.) To check the IP Address

assigned to the wireless card, double-click on the Network

Connection Icon in the taskbar > select the Support tab and the IP

Address will be displayed. (Please refer to Checking the IP

Address in the Networking Basics section of this manual.)

If it is necessary to assign a Static IP Address to the wireless card, please

refer to the appropriate section in Networking Basics. If you are entering a

DNS Server Address, you must also enter the Default Gateway Address.

(Remember that if you have a DHCP-capable router, you will not need to

assign a Static IP Address. See Networking Basics: Assigning a Static IP

Address.)