User's Manual

IEEE 802.11g Cardbus Wireless Network Adapter

3. The CG-WLCB54GL does not work properly after the driver is

installed.

• Restart the computer. (In some cases, it will be necessary to restart

the computer after installing the drivers.)

• In Windows XP, go to Start>Control Panel>System>Hardware

Tab> click on the Device Manager Tab> click on Network Cards>

double click on CG-WLCB54GL > make sure that “This device is

working properly” is displayed under Device Status under the

General Tab. (Please refer to Checking the Installation of the

Drivers for the Wireless Card in the Networking Basics section of

this manual for more information.)

• If the device is not working properly and a yellow exclamation mark is

displayed, then there is probably a resource conflict. In this case,

make sure the computer system has a free IRQ and if necessary,

uninstall the drivers, restart the system, and repeat the driver

installation procedure.

4. The wireless client cannot access the Internet in the Infrastructure

mode.

• Make sure the wireless client is associated and joined with the

correct Access Point. To check this connection: Right-click on the

Networking Icon in the taskbar> select View Available Wireless

Networks. The Connect to Wireless Network screen will appear.

Please make sure you have selected the correct available network,

as shown in the illustrations below.