User's Manual

IEEE 802.11g Cardbus Wireless Network Adapter

Please note that this type of installation requires that your ISP (Internet

Service Provider) provides you a static IP address for each computer and

the Access Point on your network. Please refer to the manual that came

with your Access Point to determine its configuration.

Please follow these steps to complete the installation:

1. Connect the Wireless Access Point to a Broadband connection.

2. Install the CG-WLCB54GL into the laptop computer(s) on your

wireless network.

3. Check the Device Manager to confirm that the wireless card is

installed correctly. Please refer to the Networking Basics section in

this manual entitled: Checking the Installation of the Drivers for

the Wireless Card.

4. Set the Static IP Address of the wireless cards. Please refer to the

Networking Basics section in this manual entitled: Assigning an IP

Address.