User's Manual
17
1. Install the 802.11g USB Adapter Wireless Stick Adapter.
2. Check the Device Manager to confirm that your adapter is installed
correctly.
3. Install your Internet Sharing Software.
4. If required by the software, set the static IP Address for the wireless
adapter.
Note: The IP Address for all the computers on the network must be in the same IP
Address range, and the Subnet Mask must be the same for all the computers on the
network. For example: If the first computer is assigned an IP Address of
192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second computer can
be assigned an IP address of 192.168.0.3 with a Subnet Mask of 255.255.255.0, etc.
If the Internet Sharing Software will be installed on a computer other than the
one in which you are installing the 802.11g USB Adapter, then follow these
steps:
1. Install the 802.11g USB Adapter into the computer.
2. Check the IP Address for the wireless adapter. Please make certain
that all the computers on your network are in the same IP Address
range. .
Note: By default, the wireless adapter is set to obtain a Dynamic IP
Address, automatically.