Owner`s manual

Bluetooth Operation

Before using the Bluetooth

Before using the Bluetooth, it's necessary to perform the following steps. For

more operating details, refer to each section below.

1. Select the "Bluetooth" option in the General setup and select the "On" option

to activate the Bluetooth feature.

2. Pair your cell phone to this unit (refer to the "Pairing" operation). It is

necessary to pair your phone to the unit. Without pairing, Bluetooth functions

are not available.

The Bluetooth icon at the top right screen will be on solid when Bluetooth

equipment has connected properly with the system. The Bluetooth icon will

flash if not connected with a Bluetooth enable device.

You can select the Bluetooth mode by going to the main menu screen and

touching the Bluetooth icon, or the system will switch to Bluetooth function

interface automatically from another function when you receive a call.

The Bluetooth phone interface main screen is shown below:

1. Dial Function: Touch to select the Dialer screen

2. Call Log: Touch to select the Dialed, Missed and Received numbers from

your device

3. Setup Function: Touch to select Bluetooth on/off, Auto Connect on/off and

Auto Answer on/off

4. Dial/Answer function: Touch to dial a number entered on the keypad, or to

answer a call

64 5