Alpha-nav multimedia Multimedia Navigation System AN5650NV OWNER’S MANUAL
CONTENTS Precautions................................................................................................. On safety....................................................................................................... Playable discs............................................................................................... Touch Screen Operation............................................................................... DVD Region Management................................................
DVD Player Operation................................................................................ Insert/Eject Disc............................................................................................ Accessing DVD Mode................................................................................... Using the Touch-Screen Controls................................................................. Controlling Playback..................................................................................
Precautions To avoid the risk of injury or accident, read the following precautions before operating the unit. On safety Comply with your local traffic rules and regulations. • While driving -You must not watch or operate the monitor. It may lead to distraction and cause an accident. Park your car in a safe place before watching the monitor and/or operating the unit. • While operating -Do not insert your hands ,fingers or foreign object into the unit while the monitor is functioning.
• Do not use the System Setup feature while driving, or perform any other function that could divert your attention from the road. • When you connect the backup camera: Watch the surroundings carefully for your safety. Do not depend on the back camera exclusively. • When backing up your car, be sure to look back for your safety. • Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal.
Touch Screen Operation Most of the touch screen buttons operate this system. To prevent damage to the screen, lightly touch buttons on the screen with your finger. When a button on the screen is touched, a beep sounds. Do not use other objects to touch the screen as it may cause damage to the LCD. DVD Region Management Some DVD discs can be played only in certain playback modes according to the design of the software.
Controls and Indicators Button Operation 10 9 8 7 1 2 3 4 5 6 1. EJECT Press for disc insertion/ejection. 2. POWER OFF/VOL Rotate dial to adjust the volume. Press to turn "ON" the unit. Press and hold to turn "OFF" the unit. Short press when the unit is "ON" to put the system in "Mute". 3. MENU Press to enter main menu, press again to go back to previous mode. 4. NAVI Press to enter navigation mode, Press again to go back to previous mode. (Navigation System will be running in the background 5.
Remote Control 8
Remote Control Function List 1. 2 3 4 5 Power Open Mute SRC Numeric Button 6 7 8 9 10 VOL up VOL down Information GOTO search Stop/Band 11 12 13 14 15 16 17 18 19 20 21 Select ESC Menu Picture Repeat A-B OK Direction Buttons Title Root Repeat Next 22 Previous 23 24 25 26 27 28 Fast Reverse Fast Forward Audio Zoom Angle SUB Title 6.7.8.9.
TFT Monitor Operation Rear Camera Mode When the vehicle is placed in "Reverse", and an optional rear camera is connected to the unit, the TFT monitor will automatically switch to the camera input source. (See installation guide for proper wiring of Reverse Trigger wire) NOTE: Rear Camera sold separately. Please contact your Alpha-Nav Dealer to inquire about the rear camera. Image Setting Video Output Format The table below shows the video output format for each source.
Adjustable Parameters Parameter Adjustment Procedure 1.Press the PIC button on the remote Each time the PIC button is pressed, the adjustment cycles from “BRIGHT’ to “CONTRAST,and the to “COLOR” 2. To adjust brightness, contrast and color Press the (34 ) buttons on the remote to adjust 3. Exit Picture Quality Setting Mode: Press the PIC button on the remote. NOTE: There must be a video signal present on the AUX or CAMERA input to adjust the above settings. Parking Brake Inhibit 1.
Operation Instructions Power On / Off Press the POWER /VOL button to turn the unit on. You can also turn on the unit by pressing the POWER button on the remote. Press and hold the POWER/VOL button on the front panel or press the POWER button on the remote to power off the unit. Selecting a Source Press the (SRC) button on the remote to change among available playing sources: TUNER, DVD iPod, AUX1 IN, AUX 2 IN, CAMERA (rear view video camera), NAVI, BLUETOOTH, USB and SD Card.
Volume Adjustment To increase or decrease the volume level, turn the POWER/VOL on the front panel or press the VOL+/ VOL- buttons on the remote control. The volume ranges from "0" to "40". Audio Equalizer Control Menu The Audio Equalizer Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements.
System Reset To correct a system halt or other unusual operation, use the tip of a pen to press the RESET button located on the front top-left corner of the unit. After a system reset, the unit restores the settings before last power off. Mute Press the MUTE button on the remote to mute the volume from the unit. Or rotate the knob of Power/ Vol. and reduce the volume to "0". Short press the Power Knob to put the system on mute. NOTE: Press the MUTE button on the remote again to restore the volume.
System Settings Enter the System Settings program menu by touching SYSTEM. In system settings, there are options such as TS Calibrate, set password, Parental control, Factory default. See picture below: TS Calibration: After selecting "Yes", a crosshair + appears in the middle of the screen. To begin calibration, press and hold the crosshair for one second until the crosshair moves to the upper left quadrant.
Steering Wheel Function Study Enter the System Settings program menu by touching SYSTEM. Select Wheel Study This menu allows you or your installer to program the internal Steering Wheel Control interface in this unit to enable the steering wheel controls in your vehicle’s steering wheel (if you have this option from the factory) to control main functions of this unit. PLEASE SEE NOTE BELOW.
ASP (Audio Signal Processing) Settings Enter the ASP setup program menu by touching ASP. The ASP Settings menu allows you to make fine audio adjustments. ASP settings have four sub-menu settings: Bass, Treble, Subwoofer crossover frequency and Bass Q factor. See picture below: Bass Frequency: Touch Bass Freq to open adjust screen 60Hz, 80Hz, 100Hz,200Hz adjustment points Depending on the audio source, select the Bass Center Frequency to achieve the best Bass effect.
General Settings General settings has five sub-menu settings: Beep, Camera, Bluetooth, Wallpaper and Version .See the picture below Beep: Touch Beep to open adjust screen When turned on, an audible beep tone confirms each function selection. Camera: Touch Camera to open adjust screen. When turned on, the rear view camera function is on. Your Alpha-Nav dealer can add this feature to your unit. Bluetooth: Touch Bluetooth to open adjust screen. When turned on, the Bluetooth receiver is on.
Language Settings Language settings have three sub-menu settings: OSD language, Subtitle language and audio language. See the picture below. OSD language: Set to show-on screen language display. Language options include English, Russian, French, Spanish and Chinese. Audio language: Set audio language display. Language options include English, Russian, French, Spanish and Chinese. Subtitle language: Set the subtitle language when in DVD playback mode.
Navi Setting Navi settings includes: Navi volume, GPS time, Daylight Savings Time, Navi setting. See the picture below: Navi Volume: Sets the navigation voice volume to blend in with the current sources audio levels. GPS Time: Setting to on allows the unit clock to display accurate time and date information without the need for manual time setting. DST (Daylight Savings Time): When turned on, adjusts the GPS time to compensate for Daylight Savings Time.
Manual Time Setting Time setting includes: time setting and date setting. See pictures below: Date setting Time setting Date setting: Touch the date setting which prompts the keypad " MM/YY/DD", then touch the numeric keypad to set the date. Time setting: Touch the date setting which prompts the keypad " AM/TIME/ PM", then touch the numeric keypad to set the time. Touch AM/PM to select 12H or 24H.time display,and then touch again to select AM or PM time.
Main Menu (Controls and Indicators) This unit contains Radio, DVD, Navigation, Bluetooth, iPod, rear view camera, SD, USB, AV IN, and Setup etc. Touch an icon on the main menu screen to select the source Main Menu is laid out in 2 different screens, as shown in the pictures below. The first screen contains, Navigation, Setup, Bluetooth, Radio, DVD/CD and iPod sources.
USB: Touch to play music, video or pictures stored on a USB memory stick, or a portable USB drive (will support a portable drive up to 20GB) SD Card: Touch to play music, video or pictures stored on an SD Card. This unit will support SD Cards up to 2GB. Camera: Touch to turn on rear view camera input. NOTE: A camera must be connected to this input and be on when Camera is selected. If not, touching the Camera input will show nothing on the screen. AUX 1: Touch to select the front panel 3.
Tuner (FM/AM) Operation From the main menu, touch the radio icon to enter radio mode, touch the home icon to exit the Radio source and return to the main menu screen. For reference the radio screen is shown below: Select FM/AM Band Touch the FM/AM band on the screen to change the following bands: FM-1, FM-2, FM-3, AM-1. Each band can store 6 stations, for a total of 24. Manual Tuning Press the icon 4 to increase the tuning frequency one step at a time.
Scan Tuning To tune to the next strongest radio station, touch the 5 icon on the top of the radio station display to tune up or the 6 to tune down to the next strongest station. Local Distant (LD) Changes the radio’s sensitivity and helps to receive weak AM or FM stations. To tune in a weak station, set to Distant (DX) or for stronger stations, set to local (LOC). It is recommended to leave this button in the DX position for maximum tuner performance. Storing a Station 1.
iPod Operation Before selecting the iPod source, make sure that the iPod cable is connected to the USB input behind the cover on the front panel. (see page 7 for location) Select iPod source by touching the iPod icon on th main menu screen. NOTE: It may take several moments before iPod audio will start to play. This is normal, as the unit is accessing all the music files on the iPod to be able to display them on screen. The more files on the iPod, the longer the wait time.
Touch screen button functions for main iPod playback screen: 1. Touch to play previous track 2. Touch to Play/Pause 3. Touch to play next track 4. Touch to start/stop Repeat track 5. Touch to start/stop Random Play 6. Touch to display the numeric keypad on the screen and then you can use the numeric keypad to directly access a track. 7. Touch to access the EQ Settings screen 8. Touch this icon to go to the detail playback screen. 9.
DVD Player Operation NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays caution information with a blue background. Rear video screens, if applicable, will operate normally Insert / Eject Disc Inserting a Disc When inserting a DVD disc, DVD mode is entered and disc play begins.
Using the Touch Screen Controls While playing a DVD, touch the center of the screen to display the Touch Screen Controls. See picture below for details. 7 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Controlling Playback Stopping Playback Touch the stop button on the screen or press the button on the remote control to stop DVD play; touch the play/pause button on the screen or the OK button on the remote control to resume disk play. Pausing Playback Touch the play/pause button on the screen to suspend or resume disc play.
Direct Chapter / Track Selection During DVD, VCD and CD playback, you can use the numeric keypad on the remote control to access a track directly. Viewing an Alternate Picture Angle (DVD Only) Some DVDs contain scenes that have been shot simultaneously from different angles.
CD/MP3/WMA/JPEG Operation Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation. Please see the DVD Player Operation section for information about these topics.
Playing CD Files After inserting a CD disc, songs will play in the sequence of the CD.The display will show the track number of the song being played. While listening to the CD, you can press the numeric buttons on the remote control or touch a track on the on screen display to play the selected track. Touch the on screen 56icons to scroll through all the tracks on the CD. MP3/WMA Discs This player allows you to play MP3/WMA files recorded on CD-ROM, CD-R, CD-RW, DVD+R/RW and DVD-R/RW.
JPEG picture play back The JPEG picture screen with folder display is shown below: 1 2 3 4 5 6 7 1: Touch to play previous picture 2: Touch to play or pause a picture 3: Touch to play next picture 4: Touch to activate/deactivate Repeat Single 5: Touch to activate/deactivate Random Mode 6: Touch to display the numeric keypad on the screen and then you can use the numeric keypad to access a picture directly 7: Touch to go to Equalizer Menu To exit the JPEG player screen, touch the upper left corner of
USB Operation Accessing USB Mode 1. To switch to USB mode, press the Menu button on the front panel to display the main menu screen, or press the (SRC) button on the remote control repeatedly until USB appears the top of the screen screen. 2. Select the second page of the Main menu by touching the lower right side of the screen and moving your finger to the left to access the second page of the Main menu screen, then touch the USB icon to select USB as your source.
SD Operation Accessing SD Mode 1. To switch to SD mode, press the Menu button on the front panel to display the main menu screen, or press the (SRC) button on the remote control repeatedly until SD appears the top of the screen screen. 2. Select the second page of the Main menu by touching the lower right side of the screen and moving your finger to the left to access the second page of the Main menu screen, then touch the SD icon to select SD as your source.
Bluetooth Operation Before using the Bluetooth Before using the Bluetooth, it's necessary to perform the following steps. For more operating details, refer to each section below. 1. Select the "Bluetooth" option in the General setup and select the "On" option to activate the Bluetooth feature. 2. Pair your cell phone to this unit (refer to the "Pairing" operation). It is necessary to pair your phone to the unit. Without pairing, Bluetooth functions are not available.
5. End function: Touch to end a call 6. Phone Transfer function: Touch to switch audio between the car speakers and the cell phone handset speaker 7. Keypad: Touch the keypad to enter a phone number 8. Delete Button: Touch to remove incorrect numbers when using the keypad to dial a number 9.
Bluetooth Setup touch the icon on the left side of the screen to access to the Bluetooth setup interface, which contains the pairing mode, auto answer and connect mode The interface returns to the keypad automatically when no settings are selected. The Bluetooth Setup Screen is shown on the top of th next page. Bluetooth: Touch to turn the Bluetooth function on or off Auto Connect: Touch to turn Auto Connect on or off.
Pairing a mobile Bluetooth device to this unit See picture of the main Bluetooth screen below: NOTE: Please refer to your Bluetooth device instructions on how to pair your device to a Bluetooth system before attempting to pair your device to this unit. To pair a device: Touch the on-screen pair button to initiate the pairing, the words “Wait Paring: will display in the information screen above the keyboard. The device name of the Bluetooth is "CAR NAVI".
Bluetooth Streaming Audio (A2DP) The Bluetooth provides the Advanced Audio Distribution Profile (A2DP) for streaming audio. Playback controls are located in the bottom center of the main Bluetooth screen shown below. 1 1. 2. 3. 4.
Navigation Please read the Navigation Software User Manual Accessing Navigation 1. Access the MAIN menu and touch the Navigation icon on the touch-screen to enter the Navigation Operation interface. 2. Or press the remote control to switch the source to Navigation. 3. Or press NAVI button on the front panel of the unit Navigation Options You can still listen to an audio program while using Navigation. To do so, do the following: Select the audio source.
Troubleshooting PROBLEM GENERAL CAUSE CORRECTIVE ACTION Radio Fuse Blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Unit will not power Illegal operation Press RESET button located on in the top left corner of front panel Replace with new battery Remote control does Battery depleted Battery installed Remove and reinstall not function incorrectly Improper connections Check wiring and correct Volume set to low Increase volume level Speakers damaged Che
PROBLEM DISC Disc does not play back Image blurred, distorted or dark CAUSE Disc is warped or scratched Disc is dirty or wet Disc rating exceeded Parental Lock rating limit Disc region code is not compatible with this unit Disc is inserted upside down Disc is illegally copied CORRECTIVE ACTION Use disc in good condition Clean disc with soft cloth Change Parental Lock settings to lower restriction Use disc with proper region code Insert disc with label side up Use original disc MP3 Interruption during p
Remote Control 1. When using the remote for the first time, you must pull out the insulation strip 2. Remove the battery if the remote control is not used for a month or longer. Remove and dispose of the old battery immediately.Do not store the battery with metallic materials. 3.
NOTE: Use only one CR2025 (3V) lithium battery. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Do not recharge, disassemble, heat or dispose of the battery in fire. Keep batteries away from children to avoid the risk of accident. Suggestions 1. Only use a piece of clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non neutral detergent (such as alcohol) may result in scratching or discoloration. 2.
FM Tuner Section Tuning Range: 87.5MHz - 107.
Alpha-nav multimedia P.O. Box 1871 Fremont, CA 94539 www.alpha-nav.
