Manualshelf

Instruction manual

ManualsBrandsAlpha Microsystems ManualsHome building and DecorSCSI
41424344454647484950
Page 38 Chapter Seven
Eagle 450 Upgrade Instructions, Rev. A00
110
REMOVE THESE
FIVE REAR PANEL
SCREWS
REMOVE THE TWO SCREWS
HOLDING THE SCSI CONNECTOR
TO THE REAR PANEL
SCSI
MAIN
ALT
BOOT
A1 A2
B1 B2
C1 C2
D1 D2
F1 F2
G1 G2
H1 H2
PARALLEL 1PARALLEL 0
ETHERNET
E1 E2
Figure 7-6: Removing the Old Rear Panel
3.
The new rear panel is smaller, so the fan attaches directly to the back of the chassis. Use the
same four screws to reattach it in the same position it previously occupied.
4.
Attach the new Eagle 450 rear panel (DWF-20753-08) to the back of the chassis using the five
screws you just removed. Leave the screws loose for now.