Service manual

Page 2 Eagle Series Computer Service Manual
DSS-10517-00, Rev. B01
ACCESSING YOUR COMPUTER
For hardware information on the AM-990 chassis consult the
AM-990 SBC Service Manual
, part
number DSS-10524-00.
When adding additional equipment or servicing your computer, you need to remove your computer’s top
cover. The top cover is held in place with four Phillips-head screws located on the computer’s rear panel.
To remove the top cover, remove the four screws from the locations indicated in the illustration below.
Once the screws have been removed, slide back and remove the top cover.
The screw locations and cover removal procedure for the “Super Eagle” (Eagle 550) chassis is
identical to the standard Eagle chassis shown in the following two illustrations.
115
SCSI
MAIN
ALT
BOOT
TOP COVER SCREWS
A1 A2
B1 B2
C1 C2
D1 D2
F1 F2
G1 G2
H1 H2
PARALLEL 1PARALLEL 0
ETHERNET
ENET
E1 E2
Eagle Top Cover Screws