Service manual

Page 20 Eagle Series Computer Service Manual
DSS-10517-00, Rev. B01
These four half-height 5.25"
mounting positions are designed
for peripherals that use
removeable media, like diskette
and tape drives. A peripheral
mounted in any of these four
positions is accessible through a
cutout in the computer's front
panel.
These two half-height 5.25"
mounting positions support hard
disk drives. Peripherals mounted in
either of these locations cannot be
accessed via the computer's front
panel.
All six peripheral mounting positions will
accommodate 3.5" devices. However,
before you can mount a 3.5" device in the
chassis, the 3.5" device must first be
installed in a 5.25" mounting bracket.
NOTE:
1
2
3
4
5
6
Peripheral Mounting Positions