Owner`s manual

Page 7-12 Chapter Seven
SELF TEST CHECKER
Configuration Test Memory Test Interval Timer Test
Steady Blinking Steady Blinking Steady Blinking
80 90 98
80 9X/1-16* 98
5b 8F/1-16*
8F 8F
Serial Port Test Hard Disk Test VCR Test
Steady Blinking Steady Blinking Steady Blinking
A0 A8 b0
A0/1-2* A8 b0
A9/11 b1
AA/11 b3
Ab/11
Diskette Drive Test
Steady Blinking
b8
b8
b9
bb
bc
NOTE: A / indicates two codes blink alternately. An * indicates the code is in the range
shown. X stands for any single digit.
Procedure #6: Alternate Boot
You perform this procedure when previous procedures indicate something may be
wrong with the software on your System Disk. The object of this procedure is to see if
the computer can boot off some other device—whether or not you are successful in
booting tells your VAR quite a bit about what might be wrong with your computer.
Eagle Series Computer Owner’s Manual, Rev. 03