Owner`s manual

Page 7-11Troubleshooting Procedures
There is a slight chance you might damage the data on the disks if you interrupt
the test while it is testing one of the storage devices.
If the test loops on the configuration test and stays on error code 80 or 8F and
won’t go further, press the reset button to stop the test.
If the test loops on the memory test, and stays on a memory error code and
won’t go further, press the reset button.
I.If errors were found, call your VAR for help.
To find out what the blinking number you circled or recorded means, refer to your
self test user’s guide.
Be sure to keep your Self Test Checker, since that information will be of help to
your VAR.
J.If the self test didn’t find a problem, return to the current troubleshooting
procedure or perform the next procedure on your checklist.
Eagle Series Computer Owner’s Manual, Rev. 03