Owner`s manual

Page 5-17System Administration

The diskette is now ready to use. To log into the diskette and write data to it, you need

to add accounts to the diskette. Use the SYSACT command again and use the A (Add)

option as described earlier. For example, to add accounts [100,2] and [120,0] on the

diskette in device FLP0:, type the following commands:

SYSACT FLP0:

RETURN

*A 100,2

RETURN

Password:

RETURN

*A 120,0

RETURN

Password: MINE

RETURN

In this example, one of the new accounts, [100,2], is not protected by a password, and

the other, [120,0], is protected by the password MINE.

For more information on FMT219, LOG, and SYSACT, refer to the

System Commands

Reference Manual

. For more information on disk accounts, see the

AMOS User’s Guide

There is a buffered I/O option that increases file transfer speed on diskette drives. For

more information on this feature, refer to the

System Commands Reference Manual

Eagle Series Computer Owner’s Manual, Rev. 03