Owner`s manual

Page 2-20 Chapter Two
SCSI
MAIN
ALT
BOOT
A1 A2
B1 B2
D1 D2
E1 E2
F1 F2
PARALLEL 0
C1 C2
For all Eagle 100
computers, port #0
(the boot port) will be
located at position F1.
For most Eagle 200
computers that include
at least one AM-314
board, port #0 (the
boot port) will be
located at position F1.
DB9 cutouts at
locations F1, F2, E1,
and E2 are not present
on some Eagle 200
computers. If there not
present, the boot port
will be at location D1.
For Eagle 200 computers
with no AM-314 boards,
the boot port (port #0) will
be located in the RJ21
connector at location
B1/B2.
NOTE:
MC1179
Eagle 100 and 200 Boot Port Locations
SCSI
MAIN
ALT
BOOT
A1 A2
B1 B2
C1 C2
D1 D2
F1 F2
G1 G2
H1 H2
PARALLEL 1PARALLEL 0
ETHERNET
E1 E2
For Eagle 300
computers that include
at least one AM-314
board, port #0 (the
boot port) will be
located at position H1.
For Eagle300 computers
with no AM-314 boards,
the boot port (port #0) will
be located in the RJ21
connector at location
D1/D2.
MC1178
Eagle 300-500 Boot Port Locations
Eagle Series Computer Owner’s Manual, Rev. 03