Owner`s manual
Page 2-2 Chapter Two
UNPACKING GUIDELINES
Unpack the computer and
save all packing material and cartons
in case you ever
need to transport the computer. The shipping material was carefully designed to provide
optimum cushioning and protection. When re-shipping or otherwise transporting your
computer, you must use the original packaging to ensure safe shipment.
When moving your computer, handle it gently. The hard disk in the main unit has
moving parts and delicate read/write heads. Rough handling could damage the drive.
If the enclosure contains a 51/4" diskette drive, note that the drive may contain an insert
used to protect the read/write heads. Do not remove this insert until you have installed
the computer and are ready to start using it. The drive may be damaged if you move the
computer and it does not contain the protective insert.
Unpack the terminal which will serve as the operator terminal and set it aside for now.
What You Will Need
When you unpack your computer you should find the following items:
__ This manual and warranty cards.
__ The main enclosure.
__ One AC power cord.
In addition to the equipment Alpha Micro has provided and the operator terminal, you
may need the following:
1.Properly configured cables for connecting your terminal to the computer.
If you want to construct your own terminal cables, you need various tools and
connectors as well as the actual cable material. See Appendix A for information
on constructing terminal cables.
2.The manufacturer’s operator manuals for your terminals and printers.
3.If your computer is set for 230 Volt AC operation, you need a 230 Volt AC power
cord with the correct plug for your geographical area. Your local VAR may already
have included this power cord with your computer; if not, contact your VAR for
information on where to get it.
4.If the operating system has not already been installed on your hard disk, you will
need a warm boot tape and a tape containing the operating system. This may be
supplied by your VAR.
Eagle Series Computer Owner’s Manual, Rev. 03