Instruction manual

Specifications Page 2-5
Eagle 450 Installation and Technical Manual, Rev. 00
SERIAL I/O
Standard Eight ports, with flow control and lightning protection
Characteristics All asynchronous serial communication ports configured for
RS232. RS422 is not supported.
Interface 8-wire RJ-45 jacks standard. For pin signals see Chapter 3.
Supported Baud Rates 50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2000, 2400, 3600,
4800, 7200, 9600, 19200, 38400, 57600
Stop Bits 2 stop bits if 110 baud;
1 stop bit all others—default.
Word Length Default: 8 data bits
Parity Default: No parity
Expansion Three expansion slots for up to 32 ports total, using AM-318-10
boards
AM-318-10 Serial I/O Board
Number of ports Eight per board; total of up to 24, with flow control and
lightning protection
Characteristics All asynchronous serial communication ports configured for
RS232. RS422 is not supported.
Interface 8-wire RJ-45 jacks standard. For pinout diagram, see Chapter 3.
Supported Baud Rates 50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2000, 2400, 3600,
4800, 7200, 9600, 19200, 38400, 57600
Stop Bits 2 stop bits if 110 baud;
1 stop bit all others—default
Word Length Default: 8 data bits
Parity Default: No parity
For compatibility with earlier systems, the Eagle 450 also supports 4-port AM-314 and 8-port
AM-318-00 serial I/O boards, with or without AM-90 cards for lightning protection.