Instruction manual

Page 6 Installation Instructions: Roadrunner 030/040 Eagle Upgrade
PDI-03500-00, Rev. B01
Enter name of SECONDARY DEVICE(s) to be defined into system,
one per line. Enter blank to terminate loading.
Device to define: /STR0
RETURN
Device to define: TRM
RETURN
Device to define:
RETURN
Enter name of program(s) to be preloaded into SYSTEM MEMORY,
one per line. Enter blank to terminate loading.
Program to load: SYSMSG.USA
RETURN
Program to load: STR.DVR[1,6]
RETURN
Program to load: CMDLIN.SYS
RETURN
Program to load: SCNWLD.SYS
RETURN
Program to load:
RETURN
Enter name of program(s) to be preloaded into USER PARTITION,
one per line. Enter blank to terminate loading.
Program to load: LOG.LIT
RETURN
Program to load: DIR.LIT
RETURN
Program to load: COPY.LIT
RETURN
Program to load: DUMP.LIT
RETURN
Program to load: MTURES.LIT
RETURN
Program to load: MTUDIR.LIT
RETURN
Program to load: FMTSCZ.LIT
RETURN
Program to load: FMTSCZ.OVR
RETURN
Program to load: DSKANA.LIT
RETURN
Program to load: DSKDDT.LIT
RETURN
Program to load: SYSACT.LIT
RETURN
Program to load:
RETURN
;after you enter this return, your AMOS32.WRM file is created.
In the example above, AM318.IDV is the system terminal interface driver. If your Eagle computer
boots on an AM-314 or AM-318-10 board, be sure to enter the correct interface driver name.
Now you can generate a warm boot tape using the CRT620/B command.
HARDWARE INSTALLATION
The following sections describe the process of transferring your Roadrunner board and peripherals from
your old computer into your new Eagle computer.
Updating the Roadrunner AM-172 or AM-174 Boot PROM
Your Eagle upgrade kit includes two Roadrunner boot PROM kits:
•
The PDB-00172-90 kit contains a new boot PROM that will make your Roadrunner AM-172
board compatible with the Eagle computer.
•
The PDB-00174-90 kit contains a new boot PROM that will make your Roadrunner AM-174
board compatible with the Eagle computer.
Make sure you install the new boot PROM included with your upgrade kit; your old boot PROM
may not be compatible with the Eagle’s AM-319(-00) or AM-319(-20) board.
The type of socket used for the boot PROM on your Roadrunner board requires a specialized removal
tool. See the illustration below for more information: