Instruction manual

Page 10 Installation Instructions: Roadrunner 030/040 Eagle Upgrade
PDI-03500-00, Rev. B01
In this configuration, the Roadrunner board is
mounted on top of four standoffs which are
attached directly to the screen on the bottom
of the chassis.
6-32 PHILLIPS-HEAD
SCREW
Roadrunner Installation (Late Model Eagle Computers)
Connecting the DC Power Cable to the Roadrunner Board
The Roadrunner board has a standard 4-pin DC power connector. Simply take one of the 4-pin power
cables extending from your power supply and plug it into the Roadrunner board. Although power
connectors are keyed, with extra force they can be installed incorrectly, so be careful.